Skip to content

Q&ACIO-261120

25 Due Diligence Techniques for Evaluating Software Vendors Beyond Sales Presentations

CIO Grid21 min read

A polished sales presentation can hide serious risks in a software purchase. These practical checks reveal how a vendor handles real data, support issues, failures, pricing, and exit plans. Insights from experts in the field show how to test each claim before signing a contract.

§ How this was made

The perspectives in this article were written by the named contributors and submitted through Connectively. Connectively's automated system selected them and used AI to write the headline, introduction, section headings, summary sections, and illustration, and to make minor edits for clarity. Articles are assembled and published automatically. Report errors to corrections@connectively.us. How we make our content

Illustration generated with AI

What the experts said

25 on console

  1. Ask About Vendor PortabilityJens Hagel
  2. Hold Precommitment Alignment MeetingsOscar Moncada
  3. Consult Departed CustomersAbhishek Shah
  4. Probe Recovery Paths in SandboxesJatin Lalit
  5. Question Engineers About Past FailuresAleksa Baburska
  6. Demonstrate Fit With Actual ScenariosKruno Sulić
  7. Seed Junk Data to Measure AccuracyCarlos Correa
  8. Interview Post-Signature Support TeamsKyle Barnholt
  9. Stage a Joint Failure ExerciseSherif Koussa
  10. Require Contractual Acceptance CriteriaGerardo Herrero
  11. Retrieve and Restore Critical RecordsJames Rowell
  12. Compare Requirements Against AlternativesEvgeny Leonov
  13. File a Trial Support TicketJimi Patel
  14. Plant a Deliberate Customer MismatchEmma Rusby
  15. Inspect Billing Units and LicensesSoham Mehta
  16. Use Versioned Defect DatasetsVishnuvardhan Reddy Kaithapuram
  17. Score AI Against Known AnswersPhilip Van den Berge
  18. Call the Product After HoursRaj Baruah
  19. Verify Handover Assets Before SigningMuhammad Huzaifa Rashdi
  20. Reproduce a Completed Job LiveTouko Ursin
  21. Map Demo Features to Pricing TiersAbdur Rahim Mostafa
  22. Attempt Data Exit on Day OneDaan Haket
  23. Meet the Delivery Team DirectlyUmair Zaheer
  24. Push an Awkward Order End-to-EndDavid Kim
  25. Review an Anonymized Quarterly Business ReviewCelia SGAR

Ask About Vendor Portability

JHJens HagelFounder & Owner, kjello

I always ask a vendor the one question no sales deck covers: how do we leave? As founder of an IT firm in Hamburg, I've seen what happens when nobody asked. An investment boutique we took on had to start a brand new Microsoft tenant because the group IT it had split from couldn't hand over the old one with its passwords. If a vendor can't explain the exit in plain words, I assume we'd be stuck with them. Jens Hagel, Founder & Owner, kjello (Hamburg, Germany)

Hold Precommitment Alignment Meetings

OMOscar MoncadaCo-founder and CEO, Stratus10

The most useful due diligence technique I know is simple: take several meetings before committing. A sales presentation shows you what the vendor wants to sell. Additional conversations show you what working together will look like in practice, what each side is expected to put in, and what each side gets out.

We learned this the hard way with a partner. We teamed up with a security company on a collaborative event, and it ended up feeling like we were finding customers for them. The problem traced back to a conversation we should have had before we started about what each side was expected to deliver. Now we use those extra meetings to get specific about contributions, the time and effort the relationship will take from both companies, and whether our objectives line up. If the answers stay vague, that tells you something.

For software vendors, I'd add two questions the sales deck won't answer. First, what's the integration tax? Enterprise platforms can take months to deploy and require significant training across teams, which can be worth it for a large enterprise and a poor fit for a smaller company. Second, how will pricing behave once your usage is real? List pricing rarely resembles what you'll pay, and per-seat or per-minute pricing can keep compounding as you grow. Test the product against your own workload, not the demo environment, and estimate what it would cost to switch away later. That number is usually invisible at the evaluation stage, and it's often the one that matters most.

Consult Departed Customers

Ask to speak with a customer who left. Every vendor has a list of happy references. The accounts that churned can tell you where the product breaks, what support is like when something goes wrong, and how painful the exit was. Plenty of vendors will say no to this, which is useful to know too.

Run the pilot on your own data and your messiest real use case, not their demo dataset. Demos are built around the product's best path, and your actual workflow almost never matches it.

Spend an hour reading their help docs and changelog. Thin docs, or a changelog that shows nothing shipped in six months, tell you more than the roadmap slide does. It's also worth asking who you'll actually talk to after signing. If the answer is a generic support inbox, plan around that.

On the contract, look hard at data export: how you get your data out, in what format, and how quickly. It's easy to skip while everyone is excited and painful to discover two years later.

Probe Recovery Paths in Sandboxes

JLJatin LalitFounder and Developer, Countdownshare

I ask for a sandbox and test one complete workflow, including what happens when it fails. A polished demo usually shows the first successful request. My due diligence starts with the retry.

As a developer building CountdownShare, I care about what an integration lets me observe and recover from. For an API-based service, I would send a request with my own identifier, follow it through the callback, then repeat it and check whether I can distinguish a retry from a new action. I also check whether the documentation matches the fields the service actually returns. A 200 response is not enough if I cannot reconcile the result with the original request.

The useful question for the vendor is: 'Can you help me trace this particular transaction end to end?' Their answer reveals much more about documentation and support than a feature checklist does. If the only way to investigate a routine failure is to open a ticket and wait for someone to inspect internal logs, that is an operating cost I need to understand before committing.

My advice is to make the proof of concept small enough to finish, but realistic enough to break. Test the recovery path you will own after the sales team leaves.

Question Engineers About Past Failures

ABAleksa BaburskaDirector of Solution Acceleration, Devox Software

I'm Aleksa Baburska, Director of Solution Acceleration at Devox Software, and this I can recommend to clients, knowing all the insides of the field.

1. Website is nothing. Even if the vendor is recommended by AI, before trusting you need to prove everything. For the evidence, you can ask a real walkthrough of projects. Ask three specific questions: What went wrong? When did the client find out? What did you change internally to prevent it from happening again? This is not the type of content companies are eager to share. A mature vendor will provide concrete answers, explain the trade-offs, and demonstrate accountability. An unreliable partner will just avoid specifics.

2. Evaluate the delivery team. Conduct a 45-minute technical discussion with the engineers who would actually work on your project, without the sales team leading the conversation. Moreover, a vendor's ability to handle problems is a much stronger predictor of partnership success than their ability to present achievements. You're not hiring a company for its best-case scenario; you're hiring it for how it performs when things go wrong.

3. Use specific sources like Gartner Magic Quadrant for unbiased review.

Demonstrate Fit With Actual Scenarios

KSKruno SulićFounder & SaaS Product Builder, Cliprise

The most effective way to evaluate a software vendor beyond the sales presentation is to make them prove fit inside your real workflow, not their polished demo environment. The due diligence technique that has revealed the most critical information for me is a scenario-based proof of capability: I give the vendor a short list of real use cases, edge cases, integration requirements, and reporting needs, then ask them to show exactly how their product handles those conditions live.

That process quickly exposes the gap between "can demo well" and "can operate in production." In SaaS and API-driven businesses, the biggest problems usually are not the headline features. They are the messy details: permissions, export limitations, API reliability, usage caps, billing logic, failed automations, audit trails, and how the tool behaves when your process is not perfectly clean. A sales demo is designed to avoid those moments. A workflow-based walkthrough forces them into the open.

One thing I watch closely is how the vendor reacts when the conversation leaves the script. If the solutions engineer can answer technical and operational questions directly, that is a good sign. If every question turns into "we can check with the team" or "that is on the roadmap," that usually means more implementation risk than the presentation suggests.

I also like to contact one or two customers who resemble my use case and ask very specific questions: what broke during onboarding, what took longer than promised, and what support looked like after signing. Reference calls are only useful when the questions are operational, not generic.

A simple but revealing test is to submit a few support or pre-sales questions during evaluation and measure speed, clarity, and ownership. In my experience, the buying process is often the best support you will ever get from that vendor. If communication is vague before the contract, it rarely improves after it.

Kruno Sulic Founder & SaaS Product Builder, Cliprise

Seed Junk Data to Measure Accuracy

CCCarlos CorreaChief Operating Officer, Ringy

When conducting due diligence on vendors, it's essential to assess their accuracy by using a sample set of data that includes the "ideal customer profile" alongside some intentionally irrelevant or junk data. Evaluate the percentage of this sample that aligns with the ideal customer profile. It's crucial to determine whether the vendor can identify and reject the junk data. Request specific metrics that indicate how well they match the ideal customer profile.

This testing process helps to differentiate between vendors who operate with integrity and those who may manipulate their results to present a misleadingly high success rate. Be wary of sales demonstrations that focus solely on appearances; impressive statistics can mask underlying issues if the vendor is willing to accept irrelevant data to boost their numbers.

A high percentage of success may initially seem appealing, but without the ability to filter out unrelated data, the vendor's solution may prove to be ineffective. In the field of operations, especially in industries like insurance, reliability and accuracy are paramount. Aim for a match percentage that is realistic and substantive—approximately 60% can indicate a genuine capability rather than an inflated figure designed to close a deal.

This threshold can quickly distinguish between reputable vendors and those eager to secure a contract without delivering true value. Always prioritize a vendor's ability to provide consistent and reliable results over superficial metrics that may not reflect their actual performance.

Interview Post-Signature Support Teams

KBKyle BarnholtCEO & Co-founder, Trewup

We ask to speak with the people who will support us after the agreement is signed, not just the executive sponsor. A structured conversation with the implementation, support, and product teams helps us understand how decisions are handled when priorities conflict. We ask everyone the same questions about escalation ownership, release updates, and recent customer challenges. This approach helps us see how teams work together beyond the sales process.

These conversations have revealed important gaps that sales presentations would never show. In one case, the support team described a manual escalation process, while leadership promised a rapid response. That mismatch revealed more than any presentation could. Consistent answers show operational discipline, while different answers highlight where promises may fail under pressure.

Stage a Joint Failure Exercise

Reference calls are often too polite to uncover operational reality. I prefer to ask a prospective vendor for a jointly designed failure scenario before contracting, one that mirrors an actual dependency outage, suspected data exposure, or account takeover. The point is to see how information moves across engineering, support, leadership, and the customer interface when facts are incomplete.

The most valuable signal is the artifacts the discussion produces. A useful partner identifies logs, owners, escalation thresholds, decision records, and customer-notification conditions. This approach once revealed a critical gap, no one owned the boundary between cloud operations and application security. That omission can determine the first twenty-four hours of an incident.

Require Contractual Acceptance Criteria

I sit on the vendor side of hospital software evaluations, and the technique that reveals the most is the one sales teams like least: ask the vendor to commit to the acceptance test before you sign the contract.

Public hospital tenders in Argentina do this well. Instead of accepting "we integrate with your systems", some of them define a separate acceptance test for each integration standard and require the vendor to set up the test environment where those services will be validated. A demo shows what the software does when everything works. A written, testable acceptance criterion shows whether the vendor is willing to be held to it. A vendor that hesitates to commit to one is telling you something no presentation will.

The second technique takes ten minutes: read the license clause on what happens to the software, and to your data, if you stop paying for support. In two of the three public tenders for hospital systems I reviewed recently, the buyer required perpetual usage rights precisely to avoid that trap. That clause tells you how locked in you will be in year three, which is when it actually matters.

Retrieve and Restore Critical Records

JRJames RowellChief Technology Officer, Capture Expense

Force a full export of claims and policy configuration during the evaluation window, then try to re-import a corrected subset. When assessing expense or finance vendors, that due diligence step reveals whether you can leave with your data intact and whether their model of policy rules matches how your company spends day to day.

Sales decks emphasise capture and mobile shine. Many organisations find the critical information appears only when exit and correction paths are tested, because that is where hidden professional-services fees and brittle schemas show up under ordinary pressure.

I also open one support ticket about a rejected claim scenario before signing. Tone and speed on that ticket predict the partnership better than a reference logo on a website that dodges a hard question.

Compare Requirements Against Alternatives

I test a software vendor against the work we'd need to deliver, starting with the requirements a polished demonstration tends to skip. We put the project's actual requirements beside the product's documented capabilities and ask the vendor to show how the difficult path works. If support for a feature depends on a separate integration or manual work, our engineers need to understand that dependency before we treat the vendor's estimate as a delivery plan.

A side-by-side check against a credible alternative has been especially useful. For each requirement, we distinguish what the product handles directly from the work we'd have to build or maintain. Then we ask the vendor to demonstrate the gaps that matter to the project. A central integration deserves a working explanation in the context of the proposed solution.

On one MVP, the comparison showed that a paid option offered no substantial advantage over an open-source alternative for the requirements we had. We selected the open-source option. It changed the purchasing question: what would the premium buy for the work in front of us? The requirement check made that answer clear enough to decide.

Pick the requirement that would be hardest to replace after implementation and request a demonstration of it with the dependencies your project will carry. Keep the decision open until the work behind the claim is clear.

File a Trial Support Ticket

A sales demo runs on clean data and the happy path. Nearly every vendor failure I have had showed up in the two places nobody tests during a trial: the API and the support queue.

The technique that has told me the most is filing a real support ticket during the free trial. Not a sales question, an actual technical problem, submitted through the normal support channel rather than to the account executive who wants the deal closed. How long it takes, whether the first reply is a human or a template, and whether that person can read a log file tells you what year two will feel like. Support during a trial is the best version you will ever get. If it is slow now, it does not improve after you sign.

Second, I load my own worst data instead of their sample set. Messy product titles, missing attributes, the long tail of SKUs with duplicate identifiers. Tools that look sharp on a curated catalog fall apart on a real one, and you learn that in an afternoon rather than in month four.

Third, I read the API docs before the pricing page. Rate limits, what happens on a partial failure, whether a full export exists. If I cannot get my own data out cleanly, the switching cost is the real price and it never appears on the quote.

The thing I stopped doing is taking reference calls with customers the vendor selected. Those are theatre. I look for churned customers or users complaining in a community instead, and I ask them what broke.

Plant a Deliberate Customer Mismatch

Create a throwaway customer path in the vendor's sandbox and time how long it takes to correct a wrong recommendation. When I evaluate tools around diagnostics and merchandising, the diligence habit that works is planting a deliberate mismatch and watching whether support and the product help me correct it without a sales engineer hovering.

Demos hide recovery paths on purpose. If the tool collapses when the photo is unclear, I learn that before I depend on it for live customers who are already frustrated with mixed advice.

I also read the data export and deletion path while the trial is active. Ownership of customer photos and answers matters as much as the pretty match screen that won the first meeting and looked polished under guidance.

Inspect Billing Units and Licenses

SMSoham MehtaGrowth Lead, Jitsu

Read the two documents a sales deck summarises: the pricing page and the license file.

The pricing page tells you the billing unit, and the unit decides the bill more than the price per tier does. In my category, Segment bills monthly tracked users, and anonymous visitors count toward them. RudderStack bills events collected. Jitsu, where I work, bills events delivered to at least one destination. Put your own traffic through each unit before comparing quotes. A cheap tier on the wrong unit gets expensive as soon as traffic grows.

The license file tells you what you're allowed to do, which matters most when a vendor calls itself open source. RudderStack's rudder-server is under the Elastic License 2.0, which bars offering it to third parties as a hosted or managed service. That's source-available, not open source. If you plan to run the software for clients, that one file decides whether you can. Jitsu is MIT-licensed, so there's no such restriction, but the point is to check the file instead of trusting the label.

Both take ten minutes to read. A presentation won't walk you through either one.

Use Versioned Defect Datasets

VRVishnuvardhan Reddy KaithapuramSoftware Development Engineer, Amazon

I never evaluate a data or AI tool on the vendor's demo data. My due diligence technique is to hand the vendor a test set we built ourselves: real-shaped data with known defects planted in it, duplicates, broken joins, values that drift out of range, records that should never pass validation. Then I watch what their tool catches and, more importantly, what it waves through.

A polished sales presentation tells you how the product behaves on clean inputs, and production is never clean inputs. The planted-defect test tells you three things a demo cannot. First, whether the tool's checks match the failure modes that actually hurt, or only the ones that are easy to check. Second, how it reports a failure: a line in a log nobody reads, or a stop with evidence attached. Third, how the vendor's team responds when their product misses something in front of you. That response is the best preview of the support relationship you are actually buying.

We keep the test set versioned, with auditable lineage for every planted defect, so the same evaluation can be rerun at renewal time against the same standard. Vendors who welcome that test have tended to survive production. Vendors who ask to skip it have told you what you needed to know.

Score AI Against Known Answers

Make them run it on your own data, and bring the ugly part. Every demo dataset is clean, with tidy names and no gaps. I'd hand the vendor a real export that includes the things that actually happen in your business: a credit note, a customer entered twice, a month with missing rows.

For AI products I'd go one step further and write a short test set before the meeting: a list of real questions from your own people, with answers you already know are right. Then score what comes back. A confident wrong total in that session tells you far more than any slide about accuracy, and you can run the same list again after their next release.

The other thing I'd ask for is the way out. How do you get all of your data and your definitions back if you leave, in what format, and what does it cost? A vendor with a clear answer has usually thought about customers as partners. One who gets vague at that point has told you something useful before you've signed.

Call the Product After Hours

Use the product the way your customers will, when the vendor isn't watching.

Sales demos are rehearsed. They run on the best script, the cleanest data and the happiest path. For anything customer-facing, like an AI receptionist, I'd ring the live demo line at 7pm, talk over it, ask something off-script and mumble my name. Those five minutes tell you more than an hour of slides.

The second thing I ask every vendor: what happens when it gets something wrong? Who notices, how fast, and who fixes it? A vendor who answers that clearly has thought about real life. One who goes back to the feature list hasn't.

Then ask to speak to a customer who nearly left. Happy references are easy to find. The one who almost churned tells you how the vendor behaves under pressure.

Verify Handover Assets Before Signing

MHMuhammad Huzaifa RashdiCo-Founder & CTO, Netvixa

I run a software house, so I see this from the vendor's side, and the most revealing check isn't in the sales deck. Ask one plain question before signing: "If we stopped working with you tomorrow, what exactly would we walk away with?"

A good vendor answers immediately: the source code in your own repository, hosting and domains in your name, admin access, and documentation another team could follow. A risky one gets vague, or says those things stay with them until the contract ends.

Then test the answer. Ask to see a real handover document from a past project, and speak to a former client, not just a current one. How a vendor handles leaving tells you more than how it handles selling.

Reproduce a Completed Job Live

Make the vendor do your real work in front of you, before you sign anything.

I sell quoting software to machine shops, so I see this from the vendor side. The demos that tell a buyer the least are the ones built on the vendor's own sample data. Everything looks fast on a part picked to look fast.

Bring one job you've already done, where you know the right answer. For a machine shop that's a part they quoted last month. Give the vendor the same files and your own rates, then compare their answer to yours line by line. If they can't run it on the call, that's your answer.

What it usually exposes is the case the demo skipped. In quoting it's small quantities. In our own CNC cost index, setup and programming are a median 59% of the cost of a one-off machined part and 8% at 100 pieces, so a tool that looks right on a 100-piece demo can be far off on the one-offs a job shop quotes every day. Every kind of software has its own version of that, whether it's the messy contact export for a CRM or a month with a weird invoice for accounting. Find yours and make the vendor run it.

Map Demo Features to Pricing Tiers

ARAbdur Rahim MostafaHubSpot Solutions Architect and Founder, CRM Wired LLC

Write down every feature shown in the demo, then ask the vendor to confirm in writing which pricing plan each one sits in. With CRM software in particular, demos often show features from the top tiers, while the quote you're comparing is for a lower plan, and the price can climb fast once you add seats or contacts. When I help companies choose a HubSpot plan, this one list usually changes the decision. Either a feature they were counting on needs a plan two levels up, or they find they're about to pay for features they'll never use. A second check worth doing is to load a few hundred of your own messy records into a trial and run your hardest process, not the vendor's sample data.

Attempt Data Exit on Day One

Ask for a trial and try to leave on day one. Put five or six fake records into the tool, export them, open the file and, if you can, import it somewhere else. At AIBuilder Marketplace we ran that exit test on 134 business software tools between 23 October and 15 November 2026. Only 57 gave us an export file of the data we had entered. In 38 of the 56 files we opened, some test data was missing or changed: a field with no column in the export, or a description that lost its line breaks. Only 3 of 12 reimports went through without duplicates or altered data. No sales demo shows you any of this. Method and results per tool: https://aibuildermarketplace.com/research/saas-data-exit-test-2026/

Meet the Delivery Team Directly

UZUmair ZaheerFounder & CEO, Binate ai

As a software and AI development company, we sit on the vendor side of this conversation every week, and the technique I recommend most is simple: ask to speak with the people who will actually build your project, not just the sales team.

A sales deck shows what a company can do at its best. A 30-minute call with the lead engineer or project manager shows how they really work. Ask them how they would approach your project, what risks they see, and what they would need from you in the first two weeks. A strong team will ask you hard questions back. A weak one will agree with everything.

Two more checks I'd add: ask for a small paid discovery phase before signing a long contract, so you see their communication and quality on real work, and read the contract for code ownership and IP terms before anything else. Who owns the code when the project ends is one of the most overlooked questions in software buying.

Push an Awkward Order End-to-End

Run one real job through the trial, not the demo data. Take last week's awkwardest quote or order and push it through end to end. Demos use clean sample data; your real work has the odd units, the half-finished jobs and the customer who always changes the order. That's where the gaps show. Before the trial, read the vendor's published limits: most software lists how many products, users or locations it handles before you need a higher plan. Xero and MYOB both publish theirs for inventory, and most small businesses only find them after they've hit one. Last, ask how you get your data out if you leave. A vague answer tells you a lot.

Review an Anonymized Quarterly Business Review

CSCelia SGARFounder & Vendor Management Consultant, Vendor Manager Hub

I work on what happens after the contract is signed, so I see where the sales presentation and reality split. It almost never happens in the first 90 days. It happens in year two, when the account manager changes, the roadmap slips and nobody on either side owns the relationship.

The due diligence technique that has told me the most: ask the vendor to show you a real quarterly business review they ran with an existing client, with names removed. You learn three things at once. Do they measure what's important to the client, or only what makes them look good? Do they report problems, or only green dashboards? And who from their side actually turns up?

If a vendor can't show you how they report on their own performance today, they won't do it for you after you sign.

Second check: ask for a reference from a client who reduced their contract or left. How a vendor talks about that client tells you how they'll treat you when things go wrong.